🌡️
Temperature (DHT)
--
°C
💧
Humidity
--
%
🌡️
Temperature (DS18B20)
--
°C
💡
Light Level
--
%
💨
Gas Level (MQ-2)
--
%
🌱
Soil Moisture
--
%
🎚️
Potentiometer
--
%
📏
Distance
--
cm
🚶
Motion Sensor
No Motion
🔘
Push Button
Released
💡
LED Control
⚠️
This control is used by Rule Engine. Manual control is overridden.
LED On/Off
PWM: 255
🎨
RGB LED
⚠️
This control is used by Rule Engine. Manual control is overridden.
⚡
Relay
⚠️
This control is used by Rule Engine. Manual control is overridden.
Relay On/Off
🎚️
Potentiometer Mapping
Mapping: None
Value: 0% → 0
Value: 0% → 0
🔧
Servo Motor
⚠️
This control is used by Rule Engine. Manual control is overridden.
90
°
🔊
Buzzer
⚠️
This control is used by Rule Engine. Manual control is overridden.
📺
LCD Display
⚠️
This control is used by Rule Engine. Manual control is overridden.
💡 Wildcards: {temp}, {humidity}, {ds18b20}, {light}, {gas}, {soil},
{distance}, {pot}, {motion}, {button}
MakerBuddy Kit
Ready...
➕
Create Rule
🎛️
Rule Engine
| Name | Steps | Loop Mode | Status | Actions |
|---|---|---|---|---|
|
🎛️
No rules created yet |
||||
🔄
Firmware Update (OTA)
Current
Version
--
Latest
Version
--
Release Date
--
Click "Check for Updates" to begin
⚙️
Dashboard Settings
Sensor Cards Settings
| Sensor | Enabled | Background Color | Accent Color |
|---|---|---|---|
| 🌡️ Temperature (DHT) | |||
| 💧 Humidity | |||
| 🌡️ Temperature (DS18B20) | |||
| 💡 Light Level | |||
| 💨 Gas Level | |||
| 🌱 Soil Moisture | |||
| 🎚️ Potentiometer | |||
| 📏 Distance | |||
| 🚶 Motion Sensor | |||
| 🔘 Push Button |
Actuator Cards Settings
| Actuator | Enabled | Background Color | Accent Color |
|---|---|---|---|
| 💡 LED Control | |||
| 🎨 RGB Control | |||
| ⚡ Relay Control | |||
| 🎚️ Potentiometer Mapping | |||
| 🔧 Servo Control | |||
| 🔊 Buzzer Control | |||
| 📺 LCD Control |